THE Panerai Reference Database - Der thread zur Datenbank =)
-
-
Sollen wir die Titan Modelle als nächsten überarbeiten?
-
Welche Modell sollen wir als nächstes bearbeiten?
Gruß Miro
-
Ist wohl das Sommerloch...
-
Ich schlag wieder was vor, hab noch ein paar Referenzen/Änderungen im Hinterkopf die eine nähere Betrachtung verdienen.
Aktuell fällt mir der Übergang bei den Submersibles von der Beschriftung „Luminor Submersible“ zu „Panerai Submersible“ ein. Ich hab leider nicht alle Referenzen im Kopf bei denen diese Änderung zum tragen kam (teilweise auch mit Änderung der Schriftfarbe weiss zu blau).
Speziell bei der BMG wurde das BMG Tech weggelassen.
Evtl. können wir eruieren welche Modelle tatsächlich betroffen sind, wann der Übergang war und welche Änderungen genau vorgenommen wurden.
Mk.I
Mk. II
Quelle: Panerai
-
-
Absolut korrekt, Fredy, was ich meinte sind Veränderungen innerhalb einer Referenznummer
-
Nach vielfachen Wunsch aus dem Forum, sind nun auch die Höhen der Uhren von ca. 700 Referenzen drin.
Gruß Miro
-
Mega 👏🏼👍🏼👌🏼
-
Nach vielfachen Wunsch aus dem Forum, sind nun auch die Höhen der Uhren von ca. 700 Referenzen drin.
Gruß Miro
Wow…. Top
-
-
Klasse!
-
Sehr cool.
-
Hallo Paneristi,
nun ist auch eine kleine Einführung für Panerai-Interessierte drin (was ich mir vor Jahren zusammensuchen musste, um zu verstehen über was Ihr überhaupt redet....).
Bitte mit euren Erfahrungen mir Fehler/Anmerkungen senden.
Introduction - The Panerai Reference Database (watchlounge.com)
Viele Grüße
Miro
-
Hallo Paneristi,
nun ist auch eine kleine Einführung für Panerai-Interessierte drin (was ich mir vor Jahren zusammensuchen musste, um zu verstehen über was Ihr überhaupt redet....).
Bitte mit euren Erfahrungen mir Fehler/Anmerkungen senden.
Introduction - The Panerai Reference Database (watchlounge.com)
Viele Grüße
Miro
...ist es beim Sausage Dial nicht so, dass die Zahlen in die Platte eingefräst werden und dann mit der Leuchtmasse aufgefüllt werden?
-
...ist es beim Sausage Dial nicht so, dass die Zahlen in die Platte eingefräst werden und dann mit der Leuchtmasse aufgefüllt werden?
Ein ausgefülltes Sandwich habe ich schon mal gehört...
Bei dem sausage oder beim painted dial?
-
Soweit ich gefunden habe beim sausage.
Wurde hier schon einmal behandelt im Beitrag 3:
-
Stimmt, jedoch sehe ich hier zwei verschiedene dials. Das sausage, wo die Zahlen dick auf das dial liegen und aus meiner Sicht aufgefüllte Sandwich, wo die Füllmasse nur minimal raussteht.
Wird aktuell beides als sausage bezeichnet.
Ist dies auf euer Sicht korrekt?
Was haltet ihr davon beide Varianten zu benennen?
Gruß Miro
-
In der Chronologie ist es so, dass zu dick ausgefüllte ausgefräste jedoch mit Leuchtmasse aufgefüllten Sandwichdials als Saussage Dial bezeichnet wurden. Optisch passt der Ausdruck natürlich auch für die „Lume-wurst auf planem Dial appliziert“-Dials, ist aber im Panerai-Chargon falsch.
-
Hallo Paneristi,
nun ist auch eine kleine Einführung für Panerai-Interessierte drin (was ich mir vor Jahren zusammensuchen musste, um zu verstehen über was Ihr überhaupt redet....).
Bitte mit euren Erfahrungen mir Fehler/Anmerkungen senden.
Introduction - The Panerai Reference Database (watchlounge.com)
Viele Grüße
Miro
Danke Miro, tolle Arbeit. Als Anregung möchte ich folgendes anmerken: Für den Vergleich der verschiedenen Luminor Gehäuse (Bettarini od. 1950) wäre es speziell für den Laien hilfreich eine Seitenansicht des Gehäuses zu zeigen. Von vorne sehen sie ja sehr ähnlich aus.
Schöne Grüße
Chris
-
Bitte mit euren Erfahrungen mir Fehler/Anmerkungen senden.
Introduction - The Panerai Reference Database (watchlounge.com)
Guten Morgen, mir ist auf die Schnelle folgendes aufgefallen:
"Sandwich dial
Panerai invented luminous dials existing out of several layers. Because of that the dial has a three-dimensional effect. That dial type is strongly connected to Panerai watches."
Hier wäre es schön mehr zur Geschichte zu erfahren:
The sandwich dial goes back to a patent filed by Swiss dial maker Stern Frères in 1935. It was first introduced by Panerai in 1943. An interesting detail of vintage sandwich dials is that the cut-outs were filled with a clear resin. This was done to seal the dangerous radium-based lume in place. The upper layer featuring the cut-outs was made from aluminium. These dials were developed to replace Panerai's previously used plastic sandwich dials which featured two distinctive pins at 3 and 9 o'clock. Plastic dials proved to be problematic as they tended to warp, thus compromising the functionality of the watches.
-----
"California dial
Combination of Roman (on top) and Arabic (bottom) letters. First time produced and delivered from Rolex exclusively to Panerai in 1936. First watch produced in Richmond time was the PAM00249. Until now Panerai produces it only as “Painted dial” and mostly in Radiomir cases, to stay close to the original vintage watches. Last year’s California dials was used also at Radiomir 1940 and Luminor cases (PAM00718, PAM00779). That dial type is strongly connected to Panerai watches, nevertheless it came from Rolex and is used today also from other brands."
Historisch ist das nicht ganz korrekt. Auch würde ich ein bisschen was zur Herkunft des Spitznamens "California" schreiben:
Combination of Roman (on top) and Arabic (bottom) letters. The California dial is a patented Rolex design from 1941. In Rolex circles it is referred to as Error-Proof dial. The term "California dial" was coined in the late 1980s when a dial restorer from California named Kirk Rich became known for restoring and repainting dials found in 1940s Rolex Bubbleback watches in Error-Proof fashion. In vintage Rolex-Panerai watches, Error-Proof dials were introduced in the final batches of Ref. 3646 from 1944. These watches had slimmer middle cases and lower bezels as they were not meant to incorporate thick Panerai sandwich dials. The first watch produced in the Richemont era was the PAM00249. Until now Panerai produces it only as “Painted dial” and mostly in Radiomir cases, to stay close to the original vintage watches. Last year’s California dials was used also at Radiomir 1940 and Luminor cases (PAM00718, PAM00779).
-----
"S.L.C. dial
Minimalistic dial design without numbers, only lines and dots. Design goes back to Panerai prototype from ~1940s. Because of that history the S.L.C. dials were used in the first time only at Radiomir collection. Now it became more and more the standard dial for the Submersible collection. At most collections the S.L.C. dial is produced with “Sandwich dial” technic. In the Submersible collection it is used in combination with the “Connected pins & dots” dial technic."
Auch das hier ist nicht ganz auf dem neusten Stand:
Minimalistic dial design without numbers, only lines and dots. The S.L.C. dial was long believed to be one of the earliest Panerai dial since it was installed in a Ref. 2533 watch from 1939 but latest research has revealed that the dial was actually made in the late 1950s. The Ref. 2533 watch in question which was used as an inspiration for the PAM00449 is a "Frankenstein" watch assembled from loose parts found at the old premises of Offine Panerai. The watch was put together by an Italian vintage Panerai dealer. Because of that history the S.L.C. dials were used in the first time only at Radiomir collection. Now it became more and more the standard dial for the Submersible collection. At most collections the S.L.C. dial is produced with “Sandwich dial” technic. In the Submersible collection it is used in combination with the “Connected pins & dots” dial technic.
LG, Jose
-